Hong Kong Mould & Environmental Hygiene Inspection, Testing, Remediation, Prevention & Training
by EnviroFry Upkeep Masters, LLC

   
www.envirohongkong.com

Divine Fry is available in Hong Kong Sept. 29, 2016, onward for the mold inspection, testing, and remediation of your Hong Kong home, condo, apartment or workplace.

  香港毒霉督察
 

        
Contact Phillip and Divine Fry by email phil@moldinspector.com Phone USA 1-480-310-7970

Mould & Environmental Inspection, Testing, Remediation, & Prevention Services in Hong Kong, Macau, mainland China, and Taiwan

For toxic mold and environmental hygiene inspection, mold testing, mold removal and mold prevention in homes, offices, and workplaces in Hong Kong, Macau, and mainline China, hire EnviroFry Upkeep Masters, LLC, mold consultants Phillip and Divine Fry, who are both Certified Environmental Hygienists, Professional Industrial Hygienists, Certified Mold Inspectors, Certified Mold Remediators, Certified Environmental Inspectors, Certified Remediation Specialists, and Certified Duct Cleaning Specialists.

The Frys fly to Hong Kong for major mold inspection, mold testing, and mold removal assignments and project. The Frys' Philippines manager Ben Perez can also fly to Hong Kong to help Hong Kong property owners, manager, and tenants.  Mr. Perez is a Certified Mold Inspector and Certified Mold Remediator, who was trained and certified in the USA.

The EnviroFry Upkeep Masters, LLC, Certified Mold Inspectors are trained and experienced to find and remove visible and hidden mold growth infestations on and inside walls, ceilings, floors, attics, crawl spaces, basements and air conditioning equipment and ducts of homes, condominiums, offices, stores, workplaces, and other buildings in Hong Kong, Macau, and China.

Divine Fry is available in Hong Kong Sept. 29, 2016, onward for the mold inspection, testing, and remediation of your Hong Kong residence, condo, apartment or workplace.

To contact the USA headquarters of EnviroFry Upkeep Masters, LLC, please email Phillip Fry phil@moldinspector.com, or call 1-480-310-7970 USA. Visit website:  www.moldexpertconsultants.com.
 

Picture of mold expert consultants Phillip Fry and Divine Fry
Certified Environmental Hygienists Phillip and Divine Fry
serve Hong Kong, Macau, Taiwan, and mainland China.

Read---

Read mould consultant Phillip Fry's suggestions for eradicating Hong Kong mould, as published in Hong Kong's South China Morning Post on April 16, 2010

"Mould Expert's Top 12 tips to prevent indoor mold in Hong Kong", published July 21, 2011, in Hong Kong's The Standard

Buy Asian Mould Health Guide 2016 Ebook for Email Delivery in Hong Kong, Macau, and China-Wide

Phillip Fry, Certified Environmental Hygienist and Professional Industrial Hygienist, announces the publication of his new ebook Asian Mould Health Guide 2016  to help property owners and managers, plus mold victims, everywhere in Hong Kong, Macau, and China-wide.

Fry’s book explains how exposure to elevated levels of indoor toxic mold can cause severe health problems for homeowners, tenants, and workplace employees, plus how Chinese physicians can diagnose and treat mold medical problems.

Humans and their pets suffer severe health consequences from exposure to elevated levels of indoor airborne mould spores thrown into the breathing air by moulds growing on and inside walls, wallpaper, ceilings, floors, carpeting, furniture, window air conditioners, heating/cooling ducts, attics, crawl spaces, and basements.

The top dozen mould health problems, according to the U.S. Government's General Accounting Office “Indoor Mold” report, which summarized 32 U.S. Government mould studies and reports, are:

1. Asthma, asthma triggers, or asthma symptoms (such as episodes or attacks); 2. Upper respiratory tract symptoms; 3. Eye symptoms; 4. Skin symptoms; 5. Allergies or allergic reactions6. Wheeze7. Cough; 8. Difficulty breathing, trouble breathing, or shortness of breath; 9. Infections (including those affecting people who have chronic lung disease); 10. Adverse effects to the nervous system; 11. Fungal colonization or opportunistic infections in immune-compromised individuals: and 12. Hypersensitivity pneumonitis.

Chinese property owners, managers, and tenants can buy the ebook for delivery by email with their Visa, Mastercard, American Express Card, or Discover Card by using this PayPal link---

Hong Kong Ozone Generator Directions for Using Ozone for the Mold Cleaning of Furniture, 

Clothing, and Air Conditioning

Aug. 23, 2013, answers to questions from a Hong Kong client (a tenant of an expensive rental flat) who purchased one of our high ozone output ozone generators, which we shipped in 3 days time (air freight) from the States to Hong Kong.


Q.
 To use ozone on sofas: I can clean the outer fabric but, how to clean the inside? I hope I can do it with the blaster?! If not possible to make the ozone go inside the fibers, what can I do?  I hope I do not have to throw it away because very expensive. I have smelled and it is not smelly.

A. First make sure the sofa is away from the wall so that the ozone can get to all surfaces. Move the ozone generator several times around the sofa. Also turn the sofa on its back so you can get ozone to the back side. While the sofa is on its back side, cut holes in the bottom side covering fabric big enough to insert the ozone machine hose deep into the sofa to inject massive amounts (at least one hour of treatment) into the interior of the sofa. After a thorough ozone treatment, use a hand-held HEPA vacuum cleaner to thoroughly vacuum all surfaces three times: horizontally, vertically, and diagonally. Third, scrub the fabric with borax laundry detergent or boric acid powder dissolved into hot water. |

Q. What about a mattress? 
A. Do the same steps as explained above for a sofa. Be sure you treat top, bottom, and all sides of mattress and box spring.

Q. What about air cons? Is there any way to make the aircons filter (recently changed) clean with the ozone?
A. Remove the filters and then clean them both filter sides with a HEPA vacuum cleaner (do the same three way treatment horizontally, vertically, and diagonally). While the filters are removed, use boric acid powder dissolved into hot water to scrub all areas inside the air con distribution register. Then, use the hose attachment of the ozone generator to inject at least 15 minutes worth of ozone treatment into the inside of each air con air supply register, plus one hour into the return air supply of a central air con system (with the system running simultaneously on fan ventilation).

Q. And what about the exhaust fans in the bathrooms, kitchen, and laundry room?
A. Remove the grill register, clean out the insides of the exhaust fan duct by scrubbing with boric acid powder or Tim-Bor, and then use the ozone generator hose to supply at least 15 minutes of ozone into each exhaust fan duct.

Q. For the clothes: how do I need to apply the ozone? Is it like leaving the clothes on the hangers while the ozone goes through the air of the room or it is more like deeply working on the item one by one?
A. Use both of your ideas for good ozone penetration of clothes with a mold smell or possible deposited/landed mold spores that don’t yet cause mold smells. After ozone treatment, wash and scrub the clothes with mold-removing borax laundry detergent.

Q.  Can I use the ozone for the leather items such handbags and coats? Will make the ozone disappear the odour?
A. Yes, but make sure you get ozone treatment to all sides/insides of handbags and coats. Then scrub with borax laundry detergent.

Q.  Finally: I have some clothes from my daughter which smell of mold but do not show any mold growth on the surface: in this case where the mold did not show yet: do I need to bring these pieces to dry cleaning or I can use the ozone treatment only. These clothes I refer are only princess disguises  and Dry Cleaning will cost me 20 US $ each and I do not want to spend so much money on this.
A. Ozone treatment should take care of the mold smell and kill landed deposited mold spores without the need for dry cleaning.

Q. To use ozone on sofas: I can clean the outer fabric but, how to clean the inside? I hope I can do it with the blaster?! If not possible to make the ozone go inside the fibers, what can I do?  I hope I do not have to throw it away because very expensive. I have smelled and it is not smelly.
A. First make sure the sofa is away from the wall so that the ozone can get to all surfaces. Move the ozone generator several times around the sofa. Also turn the sofa on its back so you can get ozone to the back side. While the sofa is on its back side, cut holes in the bottom side covering fabric big enough to insert the ozone machine hose deep into the sofa to inject massive amounts (at least one hour of treatment) into the interior of the sofa. After a thorough ozone treatment, use a hand-held HEPA vacuum cleaner to thoroughly vacuum all surfaces three times: horizontally, vertically, and diagonally. Third, scrub the fabric with borax laundry detergent or boric acid powder dissolved into hot water. |

Q. What about a mattress? 
A.Do the same steps as explained above for a sofa. Be sure you treat top, bottom, and all sides of mattress and box spring.

Q. What about air cons? Is there any way to make the aircons filter (recently changed) clean with the ozone?
A. Remove the filters and then clean them both filter sides with a HEPA vacuum cleaner (do the same three way treatment horizontally, vertically, and diagonally). While the filters are removed, use boric acid powder dissolved into hot water to scrub all areas inside the air con distribution register. Then, use the hose attachment of the ozone generator to inject at least 15 minutes worth of ozone treatment into the inside of each air con air supply register, plus one hour into the return air supply of a central air con system (with the system running simultaneously on fan ventilation).

Q. And what about the exhaust fans in the bathrooms, kitchen, and laundry room?
A. Remove the grill register, clean out the insides of the exhaust fan duct by scrubbing with boric acid powder or Tim-Bor, and then use the ozone generator hose to supply at least 15 minutes of ozone into each exhaust fan duct.

Q. For the clothes: how do I need to apply the ozone? Is it like leaving the clothes on the hangers while the ozone goes through the air of the room or it is more like deeply working on the item one by one?
A. Use both of your ideas for good ozone penetration of clothes with a mold smell or possible deposited/landed mold spores that don’t yet cause mold smells. After ozone treatment, wash and scrub the clothes with mold-removing borax laundry detergent.

Q.  Can I use the ozone for the leather items such handbags and coats? Will make the ozone disappear the odour?
A. Yes, but make sure you get ozone treatment to all sides/insides of handbags and coats. Then scrub with borax laundry detergent.

Q.  Finally: I have some clothes from my daughter which smell of mold but do not show any mold growth on the surface: in this case where the mold did not show yet: do I need to bring these pieces to dry cleaning or I can use the ozone treatment only. These clothes I refer are only princess disguises  and Dry Cleaning will cost me 20 US $ each and I do not want to spend so much money on this.
A. Ozone treatment should take care of the mold smell and kill landed deposited mold spores without the need for dry cleaning.

[Home] [Ozone Treatment Furniture] [12 Mould Prevention Steps] [Environmental-Websites-Links] [Hong-Kong-Mould-Removal] [Asbestos Deaths Rising Asia] [Stachybotrys Mold Picture]